The VB243 provides full dual path redundancy for ASI signals with autonomous operation and deep signal analysis on both signal paths for the ultimate switching decision making.
The redundancy switch offers three distinct modes of operation making it suitable for any real-life operational challenges. These are Automatic mode, Manual mode and SuperLocal mode.
The VB243 has multiple layers of redundancy. The 1RU chassis offers dual redundant power supplies and the VB243 switching card has magnetically latching relays to protect against signal disruption even during a complete loss of power.
The VB243 switch module actively taps off a small portion of the input signal from both inputs, amplifies it and then feeds it to the neighbouring VB242 ASI input module via two factory fitted cables.
This allows monitoring and analysis to take place on both inputs simultaneously for switching purposes.
If any problem in any parameter is detected, preset rules apply and the unit will check the opposite input for the same failure and perform a switch if no failure is detected. To avoid switch flapping a minimum switchback time can optionally be configured. All the parameters in the implementation of the TS 101 290 specification can be utilised as switching criteria
In automatic mode the VB243 system is fully independent and makes its own switching decisions based on the preset switching rules. In manual mode the unit can be controlled from any overlying NMS system via the extensive XML-based Eii (External Integration Interface) or via SNMP triggers.
The VB243 also features a unique superLocal mode feature to deliberately cut off overlying NMS control for emergency manual override situations via the front button panel. All parameters can be controlled via the built-in web GUI. The web GUI also gives a visual overview of parameters used in switch decisions and system status.
The VB120 blade offers a bonus ASI input port with TS 101 290 analysis support that can be used for ad-hoc monitoring in addition to the two main ASI input ports used on the VB242 blade should the need arise.
Key features include:
2:1 switching operation with latching relays
Simultaneous monitoring of two AS switching inputs plus ad-hoc ASI input
2 DVB-ASI inputs EN 50083-9, Annex B
1 DVB-ASI output EN 50083-9, Annex B
Supports burst mode, spread mode, M2S
Supports 188 or 204-byte packet length
75 ohm BNC (female) connectors
Spare ASI input: 75 ohm HD-BNC (female)
TS 101 290 priority 1, 2 and 3 switching criterias
PID analysis, service analysis, bandwidth overview, table analysis
Automatic or manual TS recording of up to 200MB
Configurable alarm severity level
PSIP support (ATSCA/78)
Management port: 10/100/1000-T RJ45
Video port: 10/100/1000-T RJ45
Alternative SFP Video port for optical connectivity
Web-based element management
9-pin DSUB alarm relay
USB type-A port for maintenance
Condensed mosaic thumbnail view of all services monitored.
Sorry, there are no resources for this product
Request a Callback
Please fill out the form below and click submit to request a callback.
Fields marked * are mandatory.
To see this product in action, contact your Phoenix Datacom Account Manager, or fill out the form below for your demonstration, online, at your place of work, or in out state of the art Cyberlab at our operations in Buckinghamshire.