The Gigabit 1X1 LX to TX, fiber to copper converter Tap allows the uninterrupted pass through of full duplex data over standard singlemode fiber cable. Decoding the optical signals this device re-clocks the data and electronically replicates an exact copy (including line errors) to two transmit-only RJ45 monitoring ports. A user is therefore able to monitor a full duplex gigabit singlemode (1310nm) network with a gigabit copper device thereby reducing the costs to monitor a high-speed singlemode link and increasing the ROI on any copper based IDS or Analyzer.

In re-clocking the signal the Gigabit LX-TX Tap maximizes transmission quality and power throughput on both the network and monitoring streams. Multiple LEDs indicate power, link and activity status for easy installation and troubleshooting with connected network equipment.

+ View Product Details

+ Download Datasheet

request quote

The Gigabit 1X1 TX to SX, copper to fiber converter Tap allows the uninterrupted pass through of full duplex data over standard UTP Cat 5 cable. Decoding the network signals this device reclocks the data and electronically replicates an exact copy (including line errors) to two transmit-only multimode monitoring ports. A user is therefore able to monitor a full duplex gigabit TX stream with a multimode monitoring device thus leveraging the monitoring flexibility and improving ROI for the MM card on the IDS and / or Analyzer.

In addition the Gigabit TX-SX Tap reclocks the data so as to maximize the signal quality and power throughput on both the network and monitoring streams. Multiple LEDs indicate power and link status for easy installation and troubleshooting with connected networking equipment.

+ View Product Details

+ Download Datasheet

request quote

The Gigabit LX to SX fiber converter Tap allows the uninterrupted pass through of full duplex data over single-mode fiber cable. Decoding the optical signals this device reclocks the data and electronically replicates an exact copy (including line errors) to two transmit-only multimode monitoring ports. A user is therefore able to monitor full duplex 1310nm single mode streams with a multimode monitoring device thus eliminating the expense of additional singlemode network cards on the IDS and / or Analyzer.

In addition the Gigabit LX-SX Tap reclocks the data so as to maximize the signal quality and power throughput. Multiple LEDs indicate power and link status for easy installation and troubleshooting with connected network equipment.

+ View Product Details

+ Download Datasheet

request quote

The Gigabit 1X1 SX to TX, fiber to copper converter Tap allows the uninterrupted pass through of full duplex data over standard multimode fiber cable. Decoding the optical signals this device reclocks the data and electronically replicates an exact copy (including line errors) to two transmit-only RJ45 monitoring ports. A user is therefore able to monitor full duplex gigabit multimode SX network with a gigabit copper monitoring device thus leveraging the monitoring flexibility and improving ROI for the gig copper based IDS and / or Analyzer.

In addition the Gigabit SX-TX Tap reclocks the data so as to maximize the signal quality and power throughput on both the network and monitoring streams. Multiple LEDs indicate power, link and activity status for easy installation and troubleshooting with connected network equipment.

+ View Product Details

+ Download Datasheet

request quote

The Gigabit ZX to SX fiber converter Tap allows the uninterrupted pass through of full duplex data over single-mode fiber cable. Decoding the optical signals this device reclocks the data and electronically replicates an exact copy (including line errors) to two transmit-only multimode monitoring ports. A user is therefore able to monitor full duplex 1550nm single mode streams with a multimode monitoring device thus eliminating the expense of additional singlemode network cards on the IDS or Analyzer.

In addition the Gigabit ZX-SX Tap reclocks the data so as to maximize the signal quality and power throughput. Multiple LEDs indicate power and link status for easy installation and troubleshooting with connected networking equipment.

+ View Product Details

+ Download Datasheet

request quote

The Gigabit 1X8 fiber Tap allows the uninterrupted pass through of duplex data over one singlemode fiber network. Decoding the optical signals, this device reclocks the data and electronically replicates multiple exact copies (including line errors) to 16 transmit-only multimode monitoring ports. A user is then able to monitor a full duplex singlemode (1310nm) network with up to 8 multimode network analyzer or IDS devices thus enabling multiple forms of network analysis and security detection on any one link at one time.

In addition, multiple monitoring port regeneration taps reclock the data to maximize the signal quality and power throughput. Multiple LEDs indicate power and link status for easy troubleshooting with connected equipment.

+ View Product Details

+ Download Datasheet

request quote

The Gigabit 1X12 LX-SX.LX fiber Tap allows the uninterrupted pass through of full duplex data over singlemode fiber network. Decoding the optical signals this device reclocks the data and electronically replicates multiple exact copies (including line errors) to twenty-four transmit-only monitoring ports in a combination of 16 multimode and 8 singlemode ports. A user is then able to monitor a full duplex 1310nm singlemode network with up to 12 no. devices thus enabling multiple forms of network analysis and security detection with 8 MM and 4 SM devices on any one link at one time.

In addition the Gigabit 1x12 LX-SX.LX Tap reclocks the data so as to maximize the signal quality and power throughput. Multiple LEDs indicate power and link status for easy installation and troubleshooting with connected network equipment.

+ View Product Details

+ Download Datasheet

request quote

The Gigabit 1X12 LX-SX fiber Tap allows the uninterrupted pass through of full duplex data over singlemode fiber network. Decoding the optical signals this device reclocks the data and electronically replicates multiple exact copies (including line errors) to eight transmit-only multimode monitoring ports. A user is then able to monitor a full duplex 1310nm singlemode network with up to 12 no. multimode devices thus enabling multiple forms of network analysis and security detection on any one link at one time.

In addition the Gigabit 1x12 LX-SX Tap reclocks the data so as to maximize the signal quality and power throughput. Multiple LEDs indicate power and link status for easy installation and troubleshooting with connected network equipment.

+ View Product Details

+ Download Datasheet

request quote